Roll Size: 25mm x 25mm – 150 Per Box
Adhesive: Acrylic Dispersion
Description: A easy-tear rayon cloth carrier with a differential modified dispersion acrylate adhesive system cut into east to use tabs. Designed for application to the floor surface first (lower tack side). Specially designed for the temporary holding of exhibition floor coverings. White silicon release paper liner.
Application: Suitable as a self-adhesive medium for synthetic profiles and rubber mouldings. Appropriate for the fixing of dry sand paper to grindstones. For the fitting of rubber blocks in flexographic printing.
|Adhesion Power||FINMAT-TM1 on Stainless Steel one side covered with 50um polyester film|
|1 minute:||13 N/25mm|
|20 minutes:||15 N/25mm|
|24 hours:||17 N/25mm|
|Shear Strength||FINAT-TM8 on Stainless Steel one side covered with 50 um polyester film|
|Service Temperature:||-40°C to 80°C|
|Shelf Life:||24 Months at 20°C and 50% RH|
Surface Preparation: The surface on which the tape is to be used must be clean, dry and free from grease and dust. Remember that pressure sensitive adhesive must be applied with the maximum possible pressure in order to achieve maximum adhesion levels. The recommended application temperature is between 15ºC and 25ºC.
Storage: Tapes stored below the minimum application temperature will require warming up to that level before use. Up to 24 hours may be required for this to take place.
Note: The above figures represent average values. Actual figures can vary. The selection and application of a tape is the responsibility of the buyer. Tape should be stored at room temperature and should not be exposed to sunlight. We reserve the right to make changes without notice to our products and specifications.