Double-Sided Polyethylene Foam Tape FRW10

Colour:  White

Roll Size:  6mm to 1020mm in 33 Metre Lengths

Adhesive:  Rubber Natural

Description: White Polyethylene closed cell foam coated on both sides with a rubber adhesive. High initial tack and excellent shear resistance in internal applications. Easy remove white silicone coated release liner. Meets BS 7449 Mirror Mounting Specs, for which Furniture Industry Research Association (FIRA) Test reports are available.

Description

Double-Sided Polyethylene Foam Tape FRW10 by Tenacious Tapes. Adhesive tape comparable to Tesa 4957 Tape or Stylus 2132 Tape. Order online from exclusive approved supplier Wayout Evacuation Systems.

Colour:  White

Roll Size:  6mm to 1020mm in 33 Metre Lengths

Adhesive:  Rubber Natural

Description: White Polyethylene closed cell foam coated on both sides with a rubber adhesive. High initial tack and excellent shear resistance in internal applications. Easy remove white silicone coated release liner. Meets BS 7449 Mirror Mounting Specs, for which Furniture Industry Research Association (FIRA) Test reports are available.

Application:  It adheres well to a variety of materials such as glass, wood, MDF, and most apolar substrates. For durable fixing of mirrors in furniture and internal domestic applications. For mounting of boards, displays and for a variety of household applications.

Technical Details:

Foam Thickness:1.00mm
Total tape Thickness:1.15mm
Elongation at Break (AFERA 4005):270%
Density67 kg/m3
180° Peel Adhesion (AFERA 4001):11.0 N/cm
Tensile Adhesion70 N/cm²
Dynamic Shear (AFERA 4024):70 N/cm²
Static Shear Adhesion (AFERA 4012):5 kg 5,000 Hours
Tensile Strength (AFERA 4004):1,200 KPa
Water absorption:<1%
Min Application Temperature:15°C
Service Temperature (Long Term):-40°C to 50°C
Storage Temperature:15°C to 25°C
Shelf Life:12 Months at 20°C 50% RH

 

Surface Preparation:  The surface on which the tape is to be used must be clean, dry and free from grease and dust. Remember that pressure sensitive adhesive must be applied with the maximum possible pressure in order to achieve maximum adhesion levels. The recommended application temperature is between 15ºC and 25ºC.

Storage:  Tapes stored below the minimum application temperature will require warming up to that level before use. Up to 24 hours may be required for this to take place.

Note:

The above figures represent average values. Actual figures can vary. The selection and
application of a tape is the responsibility of the buyer. Tape should be stored at room
temperature and should not be exposed to sunlight. We reserve the right to make changes
without notice to our products and specifications.

Reviews

There are no reviews yet.

Be the first to review “Double-Sided Polyethylene Foam Tape FRW10”

Your email address will not be published. Required fields are marked *