Differential Adhesive Transfer Tape for ATG

Colour:  Translucent

Roll Size:

12mm Widths in 33 Metre Length
NB Special lengths available on 3 Inch cores on request conventionally wound ex overseas

Adhesive:  Acrylic Modified

Description: A reverse wound transfer tape with transparent permanent clear OPEN SIDE and transparent removable solvent acrylic CLOSED SIDE reinforced with fibreglass and a bi-siliconized white coloured paper liner 90gsm.

Description

Differential Adhesive Transfer Tape by Tenacious Tapes. Adhesive tape comparable to 3M Scotch ATG Repositionable Double Coated Tissue Tape 928, Stylus T003. Order online from exclusive approved supplier Wayout Evacuation Systems.

Colour:  Translucent

Roll Size:

12mm Widths in 33 Metre Length
NB Special lengths available on 3 Inch cores on request conventionally wound ex overseas

Adhesive:  Acrylic Modified

Description: A reverse wound transfer tape with transparent permanent clear OPEN SIDE and transparent removable solvent acrylic CLOSED SIDE reinforced with fibreglass and a bi-siliconized white coloured paper liner 90gsm.

Application:

A multitude of applications within the advertising, point-of-sale, display and print industries for the temporary holding of items. The open side to be stuck to the permanent surface and then mounted to the peelable surface.
NB Not recommended for extended periods on glass where facing UV (try U300 filmic double sided).

Technical Details:

Tape Thickness AFERA 4005: 0.035mm
180º Peel Adhesion AFERA 4001: Open: 2.5 N/cm
Closed: 1.1 N/cm
Service Temperature: -30ºC to 75ºC
Short Term Temperature: -40ºC to 85ºC

 

Surface Preparation:  The surface on which the tape is to be used must be clean, dry and free from grease and dust. Remember that pressure sensitive adhesive must be applied with the maximum possible pressure in order to achieve maximum adhesion levels. The recommended application temperature is between 20ºC and 30ºC.

Storage:  Tapes stored below the minimum application temperature will require warming up to that level before use. Up to 24 hours may be required for this to take place.

Note:

The above figures represent average values. Actual figures can vary. The selection and
application of a tape is the responsibility of the buyer. Tape should be stored at room
temperature and should not be exposed to sunlight. We reserve the right to make changes
without notice to our products and specifications.

Reviews

There are no reviews yet.

Be the first to review “Differential Adhesive Transfer Tape for ATG”

Your email address will not be published. Required fields are marked *