Double Sided Rubber Tissue Tape by Tenacious Tapes. Adhesive tape comparable to Tesa 7158 Tape. Order online from exclusive approved supplier Wayout Evacuation Systems.
Roll Size: 6mm to 1250mm in 50 Metre Lengths NB Special lengths available upon request
Adhesive: Rubber Natural
Description: A very high quality 105 gsm white bleached kraft paper coated liner with polyethylene with differential silicone release treatment. A Double sided tape consisting of a non woven tissue of 12gsm coated with a solvent rubber adhesive designed for fixing, bonding & laminating applications. It has a general purpose solvent rubber adhesive, with excellent tack and initial adhesion.
Application: For joining and splicing in the paper industry where temperature constraints do not apply. Laminating or bonding to rough or porous materials and certain low energy surfaces.
|Adhesion to Steel:||5.0 N/cm|
|180º Peel Adhesion AFERA 4001 24 hours:||12.0 N/25mm|
|Service Temperature:||-15ºC to 60ºC|
Surface Preparation: The surface on which the tape is to be used must be clean, dry and free from grease and dust. Remember that pressure sensitive adhesive must be applied with the maximum possible pressure in order to achieve maximum adhesion levels. The recommended application temperature is between 15ºC and 25ºC.
Storage: Tapes stored below the minimum application temperature will require warming up to that level before use. Up to 24 hours may be required for this to take place.
Note: The above figures represent average values. Actual figures can vary. The selection and application of a tape is the responsibility of the buyer. Tape should be stored at room temperature and should not be exposed to sunlight. We reserve the right to make changes without notice to our products and specifications.