Double Sided Foamed Acrylic – Bonding Tape T711BDX

Colour:  Black

Roll Size: 6mm to 930mm in 33 Metre Lengths

Adhesive:  Acrylic Foamed Acrylic Modified

Description:  A Black 1.1mm Foamed Acrylic Tape 720 Kg/m³ designed for applications where a very high permanent bond is required. A high performance coated foamed acrylic adhesive. It is plasti-ciser and UV resistant, giving good ageing properties. It is on a red PE plastic release liner suitable for die cutting.

Part No. T711BDX Categories: , ,

Description

Colour:  Black

Roll Size: 6mm to 930mm in 33 Metre Lengths

Adhesive:  Acrylic Foamed Acrylic Modified

Description:  A Black 1.1mm Foamed Acrylic Tape 720 Kg/m³ designed for applications where a very high permanent bond is required. A high performance coated foamed acrylic adhesive. It is plasti-ciser and UV resistant, giving good ageing properties. It is on a red PE plastic release liner suitable for die cutting.

Application:  For structural bonding of metals and plastics. Typical applications include: Signage, display, shopfitting, trim mounting, badge/nameplate mounting. Particularly for applications on transparent surfaces where a black background Is required for aesthetics.

Technical Details:

Tape Thickness:1.10mm
Elongation at Break:1000%
180° Peel adhesion:
After 20 Mins @ 23ºC20.0 N/cm
After 24 Hours @ 23ºC22.0 N/cm
After 250 Hours @ 80°C18.0 N/cm
After 250 Hours @-20°C16.0 N/cm
Dynamic Shear (200mm/min, 10mm x 10mm):
After 20 Mins @ 23°C7.5 Kg/Cm2
After 24 Hours @ 23°C7.9 Kg/Cm2
After 250 Hours @ -30°C & 100%RH8.5 Kg/Cm2
After 250 Hours @ 80°C8.6 Kg/Cm2
After 250 Hours @ -80°C8.1 Kg/Cm2
Service Temperature:-30°C to 120°C
Shelf Life:12 Months

 

Surface Preparation:  The surface on which the tape is to be used must be clean, dry and free from grease and dust. Remember that pressure sensitive adhesive must be applied with the maximum possible pressure in order to achieve maximum adhesion levels. The recommended application temperature is between 15ºC and 25ºC.

Storage:  Tapes stored below the minimum application temperature will require warming up to that level before use. Up to 24 hours may be required for this to take place.

Note:  The above figures represent average values. Actual figures can vary. The selection and application of a tape is the responsibility of the buyer. Tape should be stored at room temperature and should not be exposed to sunlight. We reserve the right to make changes without notice to our products and specifications.

Reviews

There are no reviews yet.

Be the first to review “Double Sided Foamed Acrylic – Bonding Tape T711BDX”

Your email address will not be published. Required fields are marked *