Lead Foil Tape by Tenacious Tapes. Adhesive tape comparable to 3M Lead Foil Tape 420. Order online from exclusive approved supplier Wayout Evacuation Systems.
Roll Size: 6mm to 406mm in 33 Metre Lengths
Adhesive: Acrylic Pure
Description: Lead foil tape C832 is lead foil backing with rubber adhesive, paper release liner. It has good electrical and thermal conductivity and has a strong acid resistance which could be used in masking for etching and plating.
Application: The main application is weighting and balancing and X-ray plate masking.
|Tape Thickness:||0.17mm /- 20um|
|Elongation at Break:||12%|
|Adhesion to Steel:||4.0 N/cm|
|Tensile Strength:||35 N/cm|
|Service Temperature:||-40ºC to 100ºC|
|Storage Temperature:||23ºC, 50% relative humidity|
|Shelf Life:||24 Months|
Surface Preparation: The surface on which the tape is to be used must be clean, dry and free from grease and dust. Remember that pressure sensitive adhesive must be applied with the maximum possible pressure in order to achieve maximum adhesion levels. The recommended application temperature is between 15ºC and 25ºC.
Storage: Tapes stored below the minimum application temperature will require warming up to that level before use. Up to 24 hours may be required for this to take place.
The above figures represent average values. Actual figures can vary. The selection and
application of a tape is the responsibility of the buyer. Tape should be stored at room
temperature and should not be exposed to sunlight. We reserve the right to make changes
without notice to our products and specifications.