Luminous Strip Anti-Slip Tape

Colour:  Black with Luminous Strip

Roll Size:  50mm Width in 20 metre rolls

Adhesive:  Acrylic Solvent

Description:  Stair nosing medium grit tape with a 10mm luminous strip.

Part No. E3410LB Categories: , ,

Description

Colour:  Black with Luminous Strip

Roll Size:  50mm Width in 20 metre rolls

Adhesive:  Acrylic Solvent

Description:  Stair nosing medium grit tape with a 10mm luminous strip.

Application:  For use on staircases in dark areas such as theatres. Used in staging or dark areas for the luminous effect.

Technical Details:

Thickness:0.85mm ( /- 0.2mm)
Breaking Load:75 N/cm
Elongation at Break:100%
Adhesion to Steel:1.5kg/ins
Tensile Strength:

6.0kg/ins (release paper liner CD)
13.0kg/ins (release paper liner MD)

Lasting time of Fluorescence after exposure to 1,000LX for 15 Mins:
Time Exposuremcd/M²
10 Minutes5
60 Minutes1
90 Minutes0
(visibility of light requires 0.32 mcd/m²)
Resistance to Water:Good
Resistance to Solvent:Poor
Service Temperature-5°C to 50°C

** Manufactured under ISO 9001/CNS 12682

Surface Preparation:  The surface on which the tape is to be used must be clean, dry and free from grease and dust. Remember that pressure sensitive adhesive must be applied with the maximum possible pressure in order to achieve maximum adhesion levels. The recommended application temperature is between 15ºC and 25ºC.

Storage:  Tapes stored below the minimum application temperature will require warming up to that level before use. Up to 24 hours may be required for this to take place.

Note:  

The above figures represent average values. Actual figures can vary. The selection and
application of a tape is the responsibility of the buyer. Tape should be stored at room
temperature and should not be exposed to sunlight. We reserve the right to make changes
without notice to our products and specifications.

Reviews

There are no reviews yet.

Be the first to review “Luminous Strip Anti-Slip Tape”

Your email address will not be published. Required fields are marked *