Medium Tack Polyethylene Surface Protection Film

Colour:  Transparent Blue

Roll Size:  50mm to 1220mm in 100 and 500 Metre Lengths

Adhesive:  Acrylic Emulsion

Description:  Polyethylene film coated with solvent free pressure sensitive acrylic resin adhesive.

Description

Colour:  Transparent Blue

Roll Size:  50mm to 1220mm in 100 and 500 Metre Lengths

Adhesive:  Acrylic Emulsion

Description:  Polyethylene film coated with solvent free pressure sensitive acrylic resin adhesive.

Application:  Surface protection of most plastics, GRP, glass, stainless steel and aluminium (anodised & un-anodised). Medium tack adhesive suited to textured surfaces and painted steel finishes which may be formed. (Film also extends life of forming equipment).

Technical Details:

Tape Thickness: 0.11mm
Breaking Load: 37 N/25mm
Elongation at Break: 300%
Adhesion to Steel: 2.6 N/25mm
Service Temperature: -40°C to 80°C
Storage Temperature: 15°C to 25°C
Shelf Life: 12 Months


Surface Preparation:  The surface on which the tape is to be used must be clean, dry and free from grease and dust. Remember that pressure sensitive adhesive must be applied with the maximum possible pressure in order to achieve maximum adhesion levels. The recommended application temperature is between 15ºC and 25ºC.

Storage:  Tapes stored below the minimum application temperature will require warming up to that level before use. Up to 24 hours may be required for this to take place.

Note:  

The above figures represent average values. Actual figures can vary. The selection and
application of a tape is the responsibility of the buyer. Tape should be stored at room
temperature and should not be exposed to sunlight. We reserve the right to make changes
without notice to our products and specifications.

Reviews

There are no reviews yet.

Be the first to review “Medium Tack Polyethylene Surface Protection Film”

Your email address will not be published. Required fields are marked *