Red/White and Red/Yellow Diagonal
Available in Left Hand or Right Hand Stripe
Roll Size: 50mm to 775mm in 4.5 Metre Lengths
Adhesive: Acrylic Modified
Description: Reflexite® conspicuity material is composed of cube corner (microprism) retroreflective elements integrally. bonded to a flexible, smooth surfaced, tough and weather resistant UV stabilized polymeric film. The prism surfaces are coated with a vacuum deposition of aluminium to provide a mirror surface to the prism facets. The resulting tape is not more than 0.08mm thick and comes with an aggressive high tack pressure sensitive adhesive. Complies with AS/NZS 1906.1 Class 1
Application: A tough weather and solvent resistant product designed for rugged outdoor use on the sides and rear of truck/trailers or other vehicles. It is easy to apply to smooth surfaces or surfaces where tape must be cut around rivets.
|Adhesion to Steel||4.0 N/cm|
|Service Temperature||-55°C to 80°C|
|Service Life||7 Years (not printed)|
|Shelf Life||12 Months|
Surface Preparation: Surfaces to which the material will be applied must be thoroughly cleaned from dust, grease or any contamination which could affect the adhesion of the material. Freshly lacquered or painted surfaces should be completely cured. The compatibility of selected lacquers and paints should be tested by the user, prior to application of the material. For other applications the user is fully responsible for evaluating the suitability of the product, and for any risks associated with that use.
Storage: Tapes stored below the minimum application temperature will require warming up to that level before use. Up to 24 hours may be required for this to take place.
The above figures represent average values. Actual figures can vary. The selection and
application of a tape is the responsibility of the buyer. Tape should be stored at room
temperature and should not be exposed to sunlight. We reserve the right to make changes
without notice to our products and specifications.