Safety Track Glass Bead Anti-Slip Tape

Colour:  Translucent

Roll Size:  

25mm and 50mm Widths in 20 metre rolls
Other widths ex overseas available upon application

Adhesive:  Acrylic Solvent

Description:  PVC Sheeting, with Glass Beads (Grit No.20) and Acrylic Adhesive and Release Paper.

Part No. E3700 Categories: , ,

Description

Colour:  Translucent

Roll Size:  

25mm and 50mm Widths in 20 metre rolls
Other widths ex overseas available upon application

Adhesive:  Acrylic Solvent

Description:  PVC Sheeting, with Glass Beads (Grit No.20) and Acrylic Adhesive and Release Paper.

Application:  For use on floors, stairways, ladders and gangways etc. to stop slipping, especially for escape/emergency exits and stairwells.

Technical Details:

Thickness:1.8mm ( /- 0.3mm)
Breaking Load:23 N/cm
Elongation at Break:25%
Adhesion to Steel:5.8 N/cm
Service Temperature-5°C to 50°C
Storage Temperature15°C to 25°C
Shelf Life:12 Months

** Manufactured under ISO 9002/CNS 12682

Surface Preparation:  The surface on which the tape is to be used must be clean, dry and free from grease and dust. Remember that pressure sensitive adhesive must be applied with the maximum possible pressure in order to achieve maximum adhesion levels. The recommended application temperature is between 15ºC and 25ºC.

Storage:  Tapes stored below the minimum application temperature will require warming up to that level before use. Up to 24 hours may be required for this to take place.

Note:  

The above figures represent average values. Actual figures can vary. The selection and
application of a tape is the responsibility of the buyer. Tape should be stored at room
temperature and should not be exposed to sunlight. We reserve the right to make changes
without notice to our products and specifications.

Reviews

There are no reviews yet.

Be the first to review “Safety Track Glass Bead Anti-Slip Tape”

Your email address will not be published. Required fields are marked *