Self Stick PE Protection Tape by Tenacious Tapes. Order online from exclusive approved supplier Wayout Evacuation Systems.
Colour: Clear NB Translucent blue available ex overseas
Roll Size: 6mm to 1220mm in 200 Metre Lengths
Description: A clear PE film which is tack-free to the touch but will form a bond to smooth glass and plastic surfaces.
Application: Surface protection of any delicate smooth surface but, particularly, LCD/PDP panels, touch screens, VDU’s, glass and certain acrylics and plastic finishes.
|Breaking Load:||MD 1.6 /- 0.25 Kfg/mm²
TD 1.3 /- 0.25 Kfg/mm²
|Elongation at Break:||MD 350% /- 100
TD 1,000% /-100
|Adhesion to PET:||3-7 gf/25mm|
|Contraction Force:||1.0 % /- 0.5 (80°C per 10 Min)|
|Service Temperature:||-40ºC to 80ºC|
|Storage Temperature:||15ºC to 25ºC|
|Shelf Life:||12 Months|
Surface Preparation: The surface on which the tape is to be used must be clean, dry and free from grease and dust. Remember that pressure sensitive adhesive must be applied with the maximum possible pressure in order to achieve maximum adhesion levels. The recommended application temperature is between 15ºC and 25ºC.
Storage: Tapes stored below the minimum application temperature will require warming up to that level before use. Up to 24 hours may be required for this to take place.
Note: The above figures represent average values. Actual figures can vary. The selection and
application of a tape is the responsibility of the buyer. Tape should be stored at room
temperature and should not be exposed to sunlight. We reserve the right to make changes
without notice to our products and specifications.