Thermosetting Polycloth Duct Tape by Tenacious Tapes. Adhesive tape comparable to 3M Vinyl Tape 474, Stylus 357 or Husky 360 – Gaffer grade cloth tape. Order online from exclusive approved supplier Wayout Evacuation Systems
Roll Size: Widths 6mm to 12000mm in 25 metre lengths
Adhesive: Rubber Natural Thermosetting
Description: A polythene coated fabric with a strong heat and cold resisting pressure sensitive adhesive coating. Extremely flexible and will conform to bends and contours.
Application: Joint sealing on metal or plastic ducting. Suitable for air duct sealing used throughout the heating & ventilating industry. Joint sealing foil, paper, plastic-faced fibrous insulation materials. Suitable for joining smooth polystyrene insulation materials, polythene sheeting, joints and reinforcing eyelets. Protection against abrasion in inflatable polythene buildings.
|Breaking Load:||80 N/cm|
|Elongation at Break:||30%|
|Adhesion to Steel:||4.2 N/cm|
|Adhesion to Self:||3.2 N/cm|
|Moisture Vapour:||25g/m2 per 24 hours|
|Service Temperature:||-50°C to 110°C|
|Application Temperature:||5°C to 45°C|
Surface Preparation: The surface on which the tape is to be used must be clean, dry and free from grease and dust. Remember that pressure sensitive adhesive must be applied with the maximum possible pressure in order to achieve maximum adhesion levels. The recommended application temperature is between 15ºC and 25ºC.
Storage: Tapes stored below the minimum application temperature will require warming up to that level before use. Up to 24 hours may be required for this to take place.
The above figures represent average values. Actual figures can vary. The selection and
application of a tape is the responsibility of the buyer. Tape should be stored at room
temperature and should not be exposed to sunlight. We reserve the right to make changes
without notice to our products and specifications.