Waterproof Cloth Tapee by Tenacious Tapes. Order online from exclusive approved supplier Wayout Evacuation Systems.
Roll Size: 6mm to 1220mm in 50 Metre Lengths
Adhesive: Rubber Synthetic
Description: A woven cloth tape, coated on one side with a waterproof finish and on the other with an aggressive pressure sensitive adhesive. Certification to the following standards may be available on request. DEF.STAN.81-25/2 and BS3887 : 1991.
Application: Splicing, jointing, weatherproofing, export packaging, drum and keg sealing, and book spine binding. Gaffer applications, carpet repair.
|Tape Thickness:||0.33 mm|
|Breaking Load:||85 N/cm|
|Elongation at Break:||8%|
|Adhesion to Steel:||4.2 N/cm|
|Adhesion to Self:||2.4 N/cm|
|Moisture Vapour:||35g/m2/24 hrs Permeability|
|Water Extract:||pH: 6.5 to 7.5|
|Service Temperature:||-50°C to 80°C|
|Application Temperature:||10ºC to 45ºC|
Surface Preparation: The surface on which the tape is to be used must be clean, dry and free from grease and dust. Remember that pressure sensitive adhesive must be applied with the maximum possible pressure in order to achieve maximum adhesion levels. The recommended application temperature is between 15ºC and 25ºC.
Storage: Tapes stored below the minimum application temperature will require warming up to that level before use. Up to 24 hours may be required for this to take place.
The above figures represent average values. Actual figures can vary. The selection and
application of a tape is the responsibility of the buyer. Tape should be stored at room
temperature and should not be exposed to sunlight. We reserve the right to make changes
without notice to our products and specifications.