Crepe Paper Masking Tape – Auto OEM Grade by Tenacious Tapes. Adhesive tape comparable to 3M Performance Masking Tape 2380, Tesa 4314, Nitto 7291 or Stylus 8811. Order online from exclusive approved supplier Wayout Evacuation Systems.
Roll Size: From 6mm to 1400mm in 50 metre rolls
Adhesive: Rubber Natural
Description: A Natural coloured high- heat resistant crepe paper tape with rubber based Adhesive. Excellent tensile strength. High temperature, clean remove rubber pressure sensitive adhesive.
Application: This product is designed for Automotive paint masking and some critical masking applications. Also Printed circuit board applications.
|180º Peel Adhesion:||6.2 N/cm|
|Tensile Strength:||37 N/cm|
|Service Temperature:||0ºC to 145ºC|
Surface Preparation: The surface on which the tape is to be used must be clean, dry and free from grease and dust. Remember that pressure sensitive adhesive must be applied with the maximum possible pressure in order to achieve maximum adhesion levels. The recommended application temperature is between 15ºC and 30ºC.
Storage: Tapes stored below the minimum application temperature will require warming up to that level before use. Up to 24 hours may be required for this to take place.
Note: The above figures represent average values. Actual figures can vary. The selection and application of a tape is the responsibility of the buyer. Tape should be stored at room temperature and should not be exposed to sunlight. We reserve the right to make changes without notice to our products and specifications.