Roll Size: 6mm to 1250mm in 50 Metre Lengths
Adhesive: Emulsion Acrylic
Description: A yellow (Japanese Flat Rice Paper) Tape coated with an acrylic adhesive system. The tape has good UV stability and is particularly suited to masking silicon beads on glass and other surfaces. K750 also offers good resistance to solvents. An extremely versatile masking tape.
Application: This product is designed for quality masking applications on smooth surfaces. Flowmask’s thin construction and high tensile strength lend it for fineline masking applications and detail work. The paper’s finish does not repel paints and so gives a clean edge on removal. Its high temperature range makes it suitable for automotive low bake ovens.
|Elongation at Break:||3.5%|
|180° Peel Adhesion:||2.1 N/cm|
|Tensile Strength:||36.1 N/cm|
|Service Temperature:||0°C to 100°C|
Surface Preparation: The surface on which the tape is to be used must be clean, dry and free from grease and dust. Remember that pressure sensitive adhesive must be applied with the maximum possible pressure in order to achieve maximum adhesion levels. The recommended application temperature is between 15ºC and 30ºC.
Storage: Tapes stored below the minimum application temperature will require warming up to that level before use. Up to 24 hours may be required for this to take place.
The above figures represent average values. Actual figures can vary. The selection and
application of a tape is the responsibility of the buyer. Tape should be stored at room
temperature and should not be exposed to sunlight. We reserve the right to make changes
without notice to our products and specifications.