Roll Size: Widths up to 900mm in 33 Metre lengths
Adhesive: Rubber Natural
Description: A 120 Micron PE coated with an aggressive, specially formulated rubber resin adhesive designed for sticking to low energy surfaces. Outdoor UV resistance 24 months black and 12 months white.
Application: A polythene joining and repair tape. Particularly suited to use in rural sector for Silage work. As a sealing and joining tape in the construction industry and as an overwrap for pipeline protection work.
|Breaking Load:||27.5 N/cm|
|Elongation at Break:||400%|
|Adhesion to Steel:||3.2 N/cm|
|Service Temperature:||-40°C to 70°C|
|Storage Temperature:||15°C to 25°C|
|Shelf Life:||12 Months|
Surface Preparation: The surface on which the tape is to be used must be clean, dry and free from grease and dust. Remember that pressure sensitive adhesive must be applied with the maximum possible pressure in order to achieve maximum adhesion levels. The recommended application temperature is between 15ºC and 25ºC.
Storage: Tapes stored below the minimum application temperature will require warming up to that level before use. Up to 24 hours may be required for this to take place.
Note: The above figures represent average values. Actual figures can vary. The selection and
application of a tape is the responsibility of the buyer. Tape should be stored at room
temperature and should not be exposed to sunlight. We reserve the right to make changes
without notice to our products and specifications.