Bi-directional Filament Tape by Tenacious Tapes. Adhesive tape comparable to 3M Scotch Bi-Directional Filament Tape 8959, TESA 04579 Cross Filament Tape or Stylus 802. Order online from exclusive approved supplier Wayout Evacuation Systems.
Roll Size: Widths 6mm to 1350mm in 45 Metre lengths
Adhesive: Rubber Synthetic
Description: A Polypropylene Film laminated to Cross Mesh of Fibreglass Strands for Reinforcement coated with a Hot Melt/Synthetic Rubber Adhesive system.
Application: General Strapping & bundling jobs and heavy duty carton sealing, especially for two support.
|B OPP Film Thickness:||35um|
|Reinforcement – No. Fibres:||10 & 3 per cm|
|Total Grammage:||143 g/m2|
|Elongation at Break:||10%|
|Tensile Strength:||280 N/cm|
|Adhesion to Steel:||8.0 N/cm|
|Unwind Adhesion:||3.5 N/cm|
|Rolling Ball Tack:||2cm|
Surface Preparation: The surface on which the tape is to be used must be clean, dry and free from grease and dust. Remember that pressure sensitive adhesive must be applied with the maximum possible pressure in order to achieve maximum adhesion levels. The recommended application temperature is between 15ºC and 25ºC.
Storage: Tapes stored below the minimum application temperature will require warming up to that level before use. Up to 24 hours may be required for this to take place.
The above figures represent average values. Actual figures can vary. The selection and
application of a tape is the responsibility of the buyer. Tape should be stored at room
temperature and should not be exposed to sunlight. We reserve the right to make changes
without notice to our products and specifications.