Double-Sided Flooring Tape by Tenacious Tapes. Adhesive tape comparable to Nitto 5532, Stylus 720EXH or Husky 140. Order online from exclusive approved supplier Wayout Evacuation Systems.
Roll Size: Widths 6mm to 1200mm in 5 and 25 metre lengths
Adhesive: Acrylic Emulsion
Description: A strong, easy tear, flexible film coated on both sides with an aggressive emulsion adhesive based on acrylic polymers formulated to resist plasticiser attack. The tape is interleaved with a silicone coated release paper.
Application:A double-sided tape for laying flexible PVC floor coverings and P.U. backed carpets. Suitable for conversion into cut pieces – point of sale fixing, automotive mirror backing.
The suitability of the product for specific applications should be carefully assessed to ensure compliance to exact customer requirements, especially where the adhesive could come into direct contact with water.
|Breaking Load::||18 N/cm|
|Elongation at Break:||100%|
|Adhesion to Steel:||Faced Side: 6 N/cm |
Unfaced Side: 6 N/cm
|Service Temperature:||-5ºC to 70ºC|
|Application Temperature:||0ºC to 40ºC|
Surface Preparation: The surface on which the tape is to be used must be clean, dry and free from grease and dust. Remember that pressure sensitive adhesive must be applied with the maximum possible pressure in order to achieve maximum adhesion levels. The recommended application temperature is between 15ºC and 25ºC.
Storage: Tapes stored below the minimum application temperature will require warming up to that level before use. Up to 24 hours may be required for this to take place.
Note: The above figures represent average values. Actual figures can vary. The selection and application of a tape is the responsibility of the buyer. Tape should be stored at room temperature and should not be exposed to sunlight. We reserve the right to make changes without notice to our products and specifications.