Roll Size: 6mm to 1030mm in 30 Metre Lengths
Adhesive: Solvent Acrylic
Description: A black acetate cloth 0.24mm gauge, coated with an acrylic adhesive system. Offers excellent conformability, easy tear and absorption of resin and varnish.
– High grade electrical insulation
– For coil cover wrapping and wire harnesses
|Breaking Load:||62 N/cm|
|Elongation at Break:||16%|
|Adhesion to Steel:||4.6 N/cm|
|Dielectric Strength:||2.5kV Minimum|
|Class of Insulation:||ULA/105|
|Service Temperature:||-30°C to 130°C|
|Storage Temperature:||15°C to 25°C|
|Shelf Life:||12 Months|
Surface Preparation: The surface on which the tape is to be used must be clean, dry and free from grease and dust. Remember that pressure sensitive adhesive must be applied with the maximum possible pressure in order to achieve maximum adhesion levels. The recommended application temperature is between 15ºC and 25ºC.
Storage: Tapes stored below the minimum application temperature will require warming up to that level before use. Up to 24 hours may be required for this to take place.
The above figures represent average values. Actual figures can vary. The selection and
application of a tape is the responsibility of the buyer. Tape should be stored at room
temperature and should not be exposed to sunlight. We reserve the right to make changes
without notice to our products and specifications.