6mm to 1000mm in 25 Metre Lengths
NB Special lengths available upon request
Adhesive: Acrylic Dispersion
Description: A easy-tear rayon cloth carrier with a differential modified dispersion acrylate adhesive system. Designed for application to the floor surface first (lower tack side). Specially designed for the temporary holding of exhibition floor coverings. White silicon release paper liner.
Designed for the temporary holding of virtually all floor coverings
Temporary repair, handcraft etc.
Retail carpet/vinyl fixing tape (can be used with vinyls and PVC foam backings)
Advertising, P.O.S. & Display applications (hand-tearable and conformable)
|Adhesive to Steel:||Open Side: 2.8 N/cm |
Closed Side: 6.0 N/cm
|Tensile Strength:||56 N/cm|
|Service Temperature:||-20°C to 100°C|
|Storage Temperature:||15ºC to 25ºC|
|Shelf Life:||12 Months|
Surface Preparation: The surface on which the tape is to be used must be clean, dry and free from grease and dust. Remember that pressure sensitive adhesive must be applied with the maximum possible pressure in order to achieve maximum adhesion levels. The recommended application temperature is between 15ºC and 25ºC.
Storage: Tapes stored below the minimum application temperature will require warming up to that level before use. Up to 24 hours may be required for this to take place.
The above figures represent average values. Actual figures can vary. The selection and
application of a tape is the responsibility of the buyer. Tape should be stored at room
temperature and should not be exposed to sunlight. We reserve the right to make changes
without notice to our products and specifications.