Double Sided Foamed Acrylic -Temporary Mounting Tape Also TC608 Tabs 25mm x 25mm by Tenacious Tapes. Adhesive tape comparable to 3M 4658F. Order online from exclusive approved supplier Wayout Evacuation Systems.
Roll Size: 6mm to 930mm in 33 Metre Lengths
Adhesive: Acrylic Polymer
Description: A Clear 0.8mm solventless acrylic tape coated on both sides with a low tack removable adhesive. It has a high density (950 Kg/M³) clear acrylic foam core coated on both sides with a removal type acrylic adhesive and it is on a light blue PE release liner suitable for die cutting.
Application: Designed for the temporary mounting of signs and other media. The clear acrylic has a very high internal strength and so will clean remove from virtually any stable surface. Applications in the area of advertising, exhibition, display and P.O.S. particularly for rigid materials or where clarity is required.
|Tensile Strength:||4.5 kg/cm2|
|Elongation at Break:||650%|
|180° Peel adhesion:|
|After 2 Hours @ 23ºC||1.0 N/cm|
|After 24 Hours @ 23ºC||1.2 N/cm|
|After 24 Hours @ 80ºC||2.0 N/cm|
|After 24 Hours @-40ºC||0.5 N/cm|
|Service Temperature:||-30°C to 130°C|
|Shelf Life:||12 Months|
Surface Preparation: The surface on which the tape is to be used must be clean, dry and free from grease and dust. Remember that pressure sensitive adhesive must be applied with the maximum possible pressure in order to achieve maximum adhesion levels. The recommended application temperature is between 15ºC and 25ºC.
Storage: Tapes stored below the minimum application temperature will require warming up to that level before use. Up to 24 hours may be required for this to take place.
Note: The above figures represent average values. Actual figures can vary. The selection and application of a tape is the responsibility of the buyer. Tape should be stored at room temperature and should not be exposed to sunlight. We reserve the right to make changes without notice to our products and specifications.