Roll Size: 6mm to 1000mm in 50 Metre Lengths
Adhesive: Rubber Synthetic
Description: A double sided tape consisting of a glass fibre scrim coated on both sides with a specialised rubber adhesive. It has high tack and good resistance to ageing on EPDM. It is lined with a double sided silicone paper.
Application: For stabilizing rubber profiles and sealing tapes especially on EPDM- based profiles. It is not designed for use with plasticised PVC.
|Adhesive Power:||FINMAT-TM1 on Stainless Steel one side covered with 50um polyester film|
|1 minute:||35 N/25mm|
|20 minutes:||40 N/25mm|
|24 hours:||45 N/25mm|
|Shear strength:||FINAT-TM8 on Stainless Steel one side covered with 50 um polyester film|
|70° C:||10 minutes|
|Service Temperature:||-40°C to 70°C|
|Storage Temperature:||15°C to 25°C|
|Shelf Life:||24 Months at 20°C 50% RH|
Surface Preparation: The surface on which the tape is to be used must be clean, dry and free from grease and dust. Remember that pressure sensitive adhesive must be applied with the maximum possible pressure in order to achieve maximum adhesion levels. The recommended application temperature is between 15ºC and 25ºC.
Storage: Tapes stored below the minimum application temperature will require warming up to that level before use. Up to 24 hours may be required for this to take place.
Note: The above figures represent average values. Actual figures can vary. The selection and application of a tape is the responsibility of the buyer. Tape should be stored at room temperature and should not be exposed to sunlight. We reserve the right to make changes without notice to our products and specifications.