Double Sided Tissue Tape by Tenacious Tapes. Adhesive tape comparable to 3M 9888T Tapes, Tesa 4986, Nitto N5015, 191 Double Sided Tissue Tape or Budget FT5212. Order online from exclusive approved supplier Wayout Evacuation Systems.
6mm to 1220mm in 50 Metre Lengths
NB Special lengths available upon request
Adhesive: Acrylic Modified
Description: A double sided tape consisting of paper tissue carrier coated both sides with a modified acrylate adhesive. It has a very good resistance against UV radiation, extreme temperatures, chemi-cals, solvents, and humidity. Its highly shear resistant adhesive has excellent durability when attached to metal, varnish and high energy surfaces. It has a high quality PE coated 110gsm white paper liner.
Application: Designed for high speed splicing of papers, films, foil and corru-gated fibre board. Also used for attachment of all types of signs, decorations, front plates and displays where high shear strength, strong adhesion and extreme temperature resistance is required. It has a high adhesion when attached to smooth or lightly porous surfaces. Suitable as pre-stitch for sailmakers and the curtain and blind trade.
|Adhesion to Steel:||7.1 N/cm|
|Rolling Tack Ball No.:||14|
|Service Temperature:||-20ºC to 120ºC|
|Short Term Temperature:||200ºC|
Surface Preparation: The surface on which the tape is to be used must be clean, dry and free from grease and dust. Remember that pressure sensitive adhesive must be applied with the maximum possible pressure in order to achieve maximum adhesion levels. The recommended application temperature is between 15ºC and 25ºC.
Storage: Tapes stored below the minimum application temperature will require warming up to that level before use. Up to 24 hours may be required for this to take place.
The above figures represent average values. Actual figures can vary. The selection and
application of a tape is the responsibility of the buyer. Tape should be stored at room
temperature and should not be exposed to sunlight. We reserve the right to make changes
without notice to our products and specifications.