Double Sided Transfer Tape S1377 by Tenacious Tapes. Adhesive tape comparable to 3M 468, Tesa 4900 or Nitto 8600-13NC. Order online from exclusive approved supplier Wayout Evacuation Systems.
Roll Size: 6mm to 1220mm in 50 Metre Lengths
Adhesive: Acrylic Pure
Description: A double sided tape transfer tape consisting of a highly transparent pure acrylate adhesive with an excellent resistance to ultraviolet radiation, extreme temperatures, chemicals, solvents and humidity. Its high shear transfer adhesive is extremely durable on metal, varnish and high energy surfaces. It also has a high quality brown paper liner, coated on both sides with silicon and polyethylene.
Application: Ideal as an adhesive medium for signs, decorations, front plates and displays that require an extremely high shear strength, adhesion strength and temperature resistance. For adhesion to rough, structured and stamped surfaces. When applying transfer tape it is recommended that it is rolled at the smallest angle possible.
|Adhesive Power:||FINAT-TM 1, on stainless steel, one sided covered with 50 microns polyester film.|
|1 minute::||17 N/25mm|
|20 minutes:||22 N/25mm|
|24 hours:||24 N/25mm|
|Shear Strength:||FINAT-TM 8, on stainless steel, one sided covered with 50 microns polyester film.|
|Short Term Temperature:||200°C|
|Service Temperature:||-40°C to 170°C|
Surface Preparation: The surface on which the tape is to be used must be clean, dry and free from grease and dust. Remember that pressure sensitive adhesive must be applied with the maximum possible pressure in order to achieve maximum adhesion levels. The recommended application temperature is between 18ºC and 25ºC.
Storage: Tapes stored below the minimum application temperature will require warming up to that level before use. Up to 24 hours may be required for this to take place.
Note: The above figures represent average values. Actual figures can vary. The selection and application of a tape is the responsibility of the buyer. Tape should be stored at room temperature and should not be exposed to sunlight. We reserve the right to make changes without notice to our products and specifications.