Gaffer Tunnel Tape by Tenacious Tapes. Order online from exclusive approved supplier Wayout Evacuation Systems.
Roll Size: 60mm in 30 Metre Lengths
Adhesive: Solvent Acrylic
Description: A resin cloth laminate constructed of an HDPE cloth sandwiched between two LDPE filmic layers and coated with a high tack and high shear solvent acrylic adhesive. The 60mm has a central section of approximately 20mm with no adhesive. Tape tears laterally but not longitudinally.
Application: Designed as a low profile tape for the holding of cables in the entertainment industry and electrical trades. The dry central section allows the cable to move freely and so reduces its risk as a trip hazard. Also no opportunity for adhesive residue on cables, thus prolonging cable life and making easier to handle and store.
|Tape Thickness:||0.17 mm|
|Breaking Load:||75 N/cm|
|Elongation at Break:||21%|
|Adhesion to Steel:||6.1 N/cm|
|Service Temperature:||-20°C to 80°C|
|Storage Temperature:||15°C to 25°C|
|Shelf Life:||12 Months|
Surface Preparation: The surface on which the tape is to be used must be clean, dry and free from grease and dust. Remember that pressure sensitive adhesive must be applied with the maximum possible pressure in order to achieve maximum adhesion levels. The recommended application temperature is between 15ºC and 25ºC.
Storage: Tapes stored below the minimum application temperature will require warming up to that level before use. Up to 24 hours may be required for this to take place.
The above figures represent average values. Actual figures can vary. The selection and
application of a tape is the responsibility of the buyer. Tape should be stored at room
temperature and should not be exposed to sunlight. We reserve the right to make changes
without notice to our products and specifications.