Roll Size: 24mm to 1100mm in 25 and 100 Metre Lengths
Adhesive: Acrylic Emulsion
Description: Polyethylene film coated with a solvent free pressure sensitive acrylic resin adhesive.
Application: Designed for the repair and strengthening of PE Hothouses. A general purpose repair tape for indoor and outdoor applications where a clear film is required. Suitable as heavy duty surface protection on various uneven/textured surfaces.
|Breaking Load:||30 N/cm|
|Elongation at Break:||200%|
|Adhesion to Steel:||5.7 N/cm|
|Service Temperature:||-40°C to 80°C|
|Storage Temperature:||15°C to 25°C|
|Shelf Life:||12 Months|
Surface Preparation: The surface on which the tape is to be used must be clean, dry and free from grease and dust. Remember that pressure sensitive adhesive must be applied with the maximum possible pressure in order to achieve maximum adhesion levels. The recommended application temperature is between 15ºC and 25ºC.
Storage: Tapes stored below the minimum application temperature will require warming up to that level before use. Up to 24 hours may be required for this to take place.
Note: The above figures represent average values. Actual figures can vary. The selection and
application of a tape is the responsibility of the buyer. Tape should be stored at room
temperature and should not be exposed to sunlight. We reserve the right to make changes
without notice to our products and specifications.