Colour: Fluoro Lime
Roll Size: 50mm in 50 metre rolls
Adhesive: Acrylic Modified
Description: Construction Grade soft and flexible, highly reflective, weatherproof, self-adhesive films with excellent corrosion and solvent resistance. Exceeds AS/NZS 1906.1 Class 1 and Class 1W. The adhesive consists of a solvent polyacrylate, permanent pressure sensitive adhesive specially formulated for the application to metallic surfaces such as aluminium and zinc coated steel plate as well as polyolefinic substrates.
Application: The product was specifically developed for the manufacture of traffic control and guidance signs, warning, construction/work zone and information signs, which are intended for medium-term outdoor use. The Fluoro Lime is used on vehicles within mining industry. The soft PVC construction allows for use without the need for edge welding.
|Adhesion to Steel:||6.0 N/cm|
|Service Temperature||-40°C to 80°C|
|Storage Temperature||20°C to 50°C|
|Shelf Life:||12 Months|
Surface Preparation: Surfaces to which the material will be applied must be thoroughly cleaned from dust, grease or any contamination which could affect the adhesion of the material. Freshly lacquered or painted surfaces should be completely cured. The compatibility of selected lacquers and paints should be tested by the user, prior to application of the material. For other applications the user is fully responsible for evaluating the suitability of the product, and for any risks associated with that use.
Storage: Tapes stored below the minimum application temperature will require warming up to that level before use. Up to 24 hours may be required for this to take place.
The above figures represent average values. Actual figures can vary. The selection and
application of a tape is the responsibility of the buyer. Tape should be stored at room
temperature and should not be exposed to sunlight. We reserve the right to make changes
without notice to our products and specifications.