Woven Glass Cloth Tape by Tenacious Tapes. Adhesive tape comparable to 3M 361 Glass Cloth Tape or Nitto Glass Cloth Tape P-212 Wht, Stylus 352 cloth, Husky 510, Permacel P213 tape. Order online from exclusive approved supplier Wayout Evacuation Systems.
Roll Size: 6mm to 1070mm in 50 Metre Lengths
Adhesive: Acrylic Thermosetting
Description: A Woven Fibreglass Cloth with a high tack thermosetting Pure Acrylic Adhesive.
Application: High temperature masking and electrical insulation to 2500 Volts, Class F.
|Breaking Load:||300 N/cm|
|Adhesion to Steel:||3.9 N/cm|
|Service Temperature:||0°C to 155°C|
|Application Temperature:||10°C to 45°C|
|Storage Temperature:||15°C to 25°C|
|Shelf Life:||12 Months|
Surface Preparation: The surface on which the tape is to be used must be clean, dry and free from grease and dust. Remember that pressure sensitive adhesive must be applied with the maximum possible pressure in order to achieve maximum adhesion levels. The recommended application temperature is between 15ºC and 25ºC.
Storage: Tapes stored below the minimum application temperature will require warming up to that level before use. Up to 24 hours may be required for this to take place.
The above figures represent average values. Actual figures can vary. The selection and
application of a tape is the responsibility of the buyer. Tape should be stored at room
temperature and should not be exposed to sunlight. We reserve the right to make changes
without notice to our products and specifications.