Roll Size: 6mm to 1000mm in 25 Metre Lengths
Adhesive: Acrylic Modified
Description: A black polyethylene cross linked 50Kg/m3 closed cell foam coated with a permanent cross linked pressure sensitive modified acrylate adhesive on both sides, exhibiting high cohesive strength. The tape has a red siliconized PE filmic release liner.
Application: For the installation of spray cast and extruded plastic parts such as panels, bars and ducts, as well as plexiglass mirrors for interior fit-outs, displays and exterior applications. For use as a self adhesive medium for hooks, signs, handles and dispensers. Ideal for use in applications where there is an inconsistency in the gap between surfaces.
|180º Peel Adhesion (limited by internal strength of core):||8 N/cm|
|Static Shear Stainless Steel:||2.7 Kg/cm2 >100 Hours|
|Service Temperature:||-40°C to 70°C|
|Storage Temperature:||15°C to 25°C|
Surface Preparation: The surface on which the tape is to be used must be clean, dry and free from grease and dust. Remember that pressure sensitive adhesive must be applied with the maximum possible pressure in order to achieve maximum adhesion levels. The recommended application temperature is between 15ºC and 25ºC.
Storage: Tapes stored below the minimum application temperature will require warming up to that level before use. Up to 24 hours may be required for this to take place.
Note: The above figures represent average values. Actual figures can vary. The selection and application of a tape is the responsibility of the buyer. Tape should be stored at room temperature and should not be exposed to sunlight. We reserve the right to make changes without notice to our products and specifications.