Double Sided Polyethylene Foam Tape by Tenacious Tapes. Adhesive tape comparable to 3M 4428 Tape, Tesa 62855, Stylus 5589, PPC 580 or Nitto 5710 Tape. Order online from exclusive approved supplier Wayout Evacuation Systems.
Roll Size: 6mm to 1250mm in 66 Metre Lengths
Adhesive: Acrylic Pure
Description: Black Polyethylene closed cell foam coated with pressure sensitive pure acrylate adhesive on both sides. Easy remove white silicone coated polyethylene release liner. Offers very good final strength and resistant to extreme temperatures and solvents.
Application: OEM grade for durable adhesion of signs & trims, letters and emblems. Also for constructional fitting & installation of a wide variety of materials including metals, glass, plastics & ceramics.
|Adhesion Power||FINMAT-TM1 on Stainless Steel one side covered with 50um polyester film:|
|1 minute:||16 N/25mm|
|20 minutes:||17 N/25mm|
|24 hours:||20 N/25mm|
|Shear Strength||FINAT-TM8 on Stainless Steel one side covered with 50 um polyester film:|
|Service Temperature:||-40°C to 125°C|
|Storage Temperature:||15°C to 25°C|
|Shelf Life:||24 Months at 20ºC 50% RH|
Surface Preparation: The surface on which the tape is to be used must be clean, dry and free from grease and dust. Remember that pressure sensitive adhesive must be applied with the maximum possible pressure in order to achieve maximum adhesion levels. The recommended application temperature is between 15ºC and 25ºC.
Storage: Tapes stored below the minimum application temperature will require warming up to that level before use. Up to 24 hours may be required for this to take place.
The above figures represent average values. Actual figures can vary. The selection and
application of a tape is the responsibility of the buyer. Tape should be stored at room
temperature and should not be exposed to sunlight. We reserve the right to make changes
without notice to our products and specifications.