PVC Heavy Duty Pipe Protection Tape by Tenacious Tapes. Adhesive tape comparable to Tesa Pipe Wrap – Isolation Tape – 51482, Stylus 2907, Permacel P306 or Husky 558 . Order online from exclusive approved supplier Wayout Evacuation Systems.
Colour: Black and Silver
Roll Size: Widths 6mm to 1300mm in 33 Metre lengths
Adhesive: Rubber Natural
Description: A heavy duty PVC film, coated with an anti-corrosive aggressive adhesive.
Application: Corrosion and abrasion protection for underground or above ground pipework, use as an inner wrap or rock shield. Separation/isolation of dissimilar metals to prevent galvanic action, particularly in the roofing industry. Prolongs pipework lifespan and helps eliminate frequent maintenance, i.e. painting, galvanizing, etc. Kicking strip for washing machines, freezers, fitted units. Eyelet patches for tarpaulins.
|Breaking Load:||44 N/cm|
|Elongation at Break:||220%|
|Adhesion to Steel:||3.4 N/cm|
|Adhesion to Self:||3.0 N/cm|
|Moisture Vapour:||40g/m2/24 hrs|
|Water Extract:||pH 6.0 to 8.0 |
Conductivity Max. 2.5 mS/m
|Flame Retardancy:||Self-extinguishing (Platelet Method)|
|Service Temperature:||-5°C to 80°C|
|Application Temperature:||5°C to 40°C|
Surface Preparation: The surface on which the tape is to be used must be clean, dry and free from grease and dust. Remember that pressure sensitive adhesive must be applied with the maximum possible pressure in order to achieve maximum adhesion levels. The recommended application temperature is between 15ºC and 25ºC.
Storage: Tapes stored below the minimum application temperature will require warming up to that level before use. Up to 24 hours may be required for this to take place.
Note: The above figures represent average values. Actual figures can vary. The selection and
application of a tape is the responsibility of the buyer. Tape should be stored at room
temperature and should not be exposed to sunlight. We reserve the right to make changes
without notice to our products and specifications.