PVC Repair Tape by Tenacious Tapes. Adhesive tape comparable to PPC 320. Order online from exclusive approved supplier Wayout Evacuation Systems.
Roll Size: Widths 6mm to 1300mm in 33 Metre lengths
Adhesive: Rubber Natural
Description: A translucent PVC Electrical repair tape which is flame retardant, falling into the self extinguishing category. AT27 is stabilised against UV degradation.
Application: Repair of polythene sheeting, splicing of continuous process films, e.g. polyethylene, PVC, etc. Repair and protection of documents, maps, etc. A D.I.Y. product for semi-invisible repairs.
|Breaking Load:||26 N/cm|
|Elongation at Break:||130%|
|Adhesion to Steel:||3.2 N/cm|
|Adhesion to Self:||2.8 N/cm|
|Copper Corrosion:||No Staining|
|Flame Retardancy:||Self-extinguishing (Platelet Method)|
|Service Temperature:||0°C to 70°C|
|Application Temperature:||5°C to 40°C|
Specification: Certification to the BS3887 : 1991 standard is available on request.
Surface Preparation: The surface on which the tape is to be used must be clean, dry and free from grease and dust. Remember that pressure sensitive adhesive must be applied with the maximum possible pressure in order to achieve maximum adhesion levels. The recommended application temperature is between 15ºC and 25ºC.
Storage: Tapes stored below the minimum application temperature will require warming up to that level before use. Up to 24 hours may be required for this to take place.
The above figures represent average values. Actual figures can vary. The selection and
application of a tape is the responsibility of the buyer. Tape should be stored at room
temperature and should not be exposed to sunlight. We reserve the right to make changes
without notice to our products and specifications.